HEART actuators.stalled H-09003
Actuator stalled. It is blocked or cannot move.
| Code | HEART actuators.stalled; inside a message "code": "actuators.stalled" |
|---|---|
| H-number | H-09003: area 09, code 003 |
| Area | actuators: Motors, valves, heaters, compressors |
| Typical severity | error. A product may set another for its own case. |
| Applies to | Products with motors, valves, pumps, heaters, compressors, contactors or other moving parts |
Likely causes
- Something blocks it.
- A seized bearing or gearbox.
- Too heavy a load.
- Ice or dirt.
How to fix or prevent it
- Switch off and make safe before touching it.
- Remove the blockage.
- Check bearings and gears.
What the HEART does by itself
It raises an error alert. The product's own protection should cut power to the motor. A HEART does not try to force it.
When to call service
If it is not a simple blockage, or the part is heavy machinery.
Related codes
actuators.overcurrentH-09005: Overcurrentactuators.not-respondingH-09001: Actuator not respondingperformance.too-hotH-05005: Too hot
Inside a message a code is written bare, "code": "storage.full". In logs, tickets, documents and searches it is written
HEART storage.full. Things that simply happen, such as system.started, are event types, not faults.
The codes are defined in Part 3, Section 5.4, and their H-numbers in Section 5.7.
All of it, as data: fault-codes.json.
All fault codes, by area · All fault codes, by H-number · Problem types (API errors)